PRODUCTS
Automatic Cantilever Softness Tester 【end of manufacture】
Model
CAN-1MCA
Reference standard
JIS L 1096、JIS L 1018、JASO M403 standards
Use/Good point
This apparatus is suitable to estimate the softness of woven or knitted and car-sheet fabrics.
Place the specimen on the horizontal table with 45°slope on one side and a smooth surface. So as to align the short end of the specimen with the base line of the scale. Then, slide the specimen towards the slope at a constant speed, and read the moving distance of one side as the other end comes in contact with the slope. The degree of softness is determined by the moving distance of the specimen.
It employs the motor driven sliding to send specimen at a constant speed, and use photo-electric sensor to detect the contact point so as to measure the moving distance automatically.
The moving speed of the specimen can be preset at 5 mm／sec or 10 mm／sec, and the result can be printed out.
Spec
| CAN-1MCA | |
|---|---|
| Specimen size | Length:150mm,200mm Width:~25mm |
| Slope angle | 45° |
| Moving speed | 5mm／sec、10mm／sec (preset on display) |
| Measuring range | In case of sample length 150㎜ : 25-125㎜ In case of sample length 200㎜ : 25-175㎜ |
| Min. reading | 1㎜－While measuring (on display) 1㎜－While measuring (on display) 0.1㎜－When measurement is completed and print out. |
| Result display | LCD display and print out |
| Display | LCD (4-digit) |
| Printer | Thermal-micro printer |
| Power supply | AC 100/200/220V 50/60Hz |
| Dimensions | Approx. W470×D170×H200mm |