PRODUCTS
Back to listsPin-On-Disk Abrasion Tester
Model
RD-100M
Reference standard
JIS K-7218 (Testing Methods for Sliding Wear Resistance
of Plasics)
Use/Good point
This is an abrasion tester, used to appraise the sliding wear resistance when two specimens slide to rub each
other, such as plastic, ceramic. Install the plastic round
specimen in the pin holder, the rubbing partner is in the
turning disk. Give a certain load pressure to the speci-
men it will come in contact with the turning rubbing partner below.]
The wear characteristics of a sample are evaluated from mass change and the dimentional changr of a sample
a regulation rotation test.
Spec
| RD-100M | |
|---|---|
| Sample size | Φ5×30mm (round bar type) □ 4.43×30mm (angle stick) |
| Turning rubbing partner | Metal disk (Surface coarseness： 0.8μ mRa） |
| Metal disk size | Φ300mm×t 3 mm |
| Test load weight | 10N、40n、70N、100N |
| Rubbing speed | 800±40 mm／sec（Fixed) |
| Friction distance | 1～9999 m （Arbitrary set up） |
| Friction position：Radius | 100±0.5mm (From the center of a disk) |
| Outside dimension | W350×D510×H450 mm |
| Power source | AC 100V or AC200V |