PRODUCTS
Back to listsTesting Heating Roller
Model
HR-400S
Use/Good point
This apparatus is a testing roller used in laboratories for fusion-bonding process that gives a pressure to thin materials such as resin films or textiles, and also that can do laminating between films and the other different kinds of materials.
There are two roller types, the metal rollers both upper and lower, as well as the metal upper roller and rubber lower roller.
*The roller diameter and the rubber hardness can be changed by various requirements.
Spec
| HR-400S | |
|---|---|
| Roller dimensions | Φ150×W400mm |
| Roller materials | Metal heating roller(Hard chrome plating), Rubber roller(Silicon rubber) |
| Heating roller temperature | 50~220℃ |
| Roller heating method | Electric heater(2.5KW) |
| Temperature controller | Digital indication adjuster |
| Temperature sensor | Roller surface non-contacting sensor |
| Temperature distribution accuracy | ±2°(Effective width 300mm) |
| Roller turning speed | 0.3~3m/min |
| Motor | Inverter(0.1KW) |
| Roller pressurization method | Air cylinder |
| Maximum pressure | 2000Kgf |
| Power source | Three-phase 200V 3KW |
| External dimensions | W1000×D500×H1200mm |