PRODUCTS
Back to listsAutomatic Pressure Resistance Tester for Aerosol-Cans 【end of manufacture】
Model
AC-3MPA
Use/Good point
This apparatus is a tester that measures pressure resistance of an aerosol-can. The sample is prepared with supplying water into a can to give hydraulic pressure, then measuring the pressure at the points of deformation and fracture of the can. This apparatus is composed of the control part, the pressurizing mechanism, the pressure detection part, and the sample installation part, and this device has equipped with the LCD display for the setting and the LED indicator for pressure indication on the control part. Moreover, the PC output is available. It makes the analysis of pressure change easier if this tester is connected with PC.
The operation of measurement is fully automatic after pressing “start button”.
Spec
| AC-3MPA | |
|---|---|
| Maximum pressure | ～2.5 MPa |
| Minimum readout value | 0.02 MPa |
| Maximum push-out water dosage | 100cc |
| Initial pressure（deforming pressure） | ～2.0 MPa（configurable） |
| Ultimate pressure（fracturing pressure） | ～2.5 MPa（configurable） |
| Pressurization speed | ～30kPa /sec |
| Retention time | ～60sec（configurable） |
| Manipulation panel | LCD display （4 digits） |
| External output | USB connecter |
| Safety devices | Pressure safety valves, Emergency stop switch |
| Power source | AC 100V 50/60Hz |
| External dimension | Approx. W900xD550xH1430mm |