PRODUCTS
Back to listsTest Washer Apparatus（Washer Method）【end of manufacture】
Model
WS-1SE
Reference standard
JIS L 1096, JIS L 1018
Use/Good point
This apparatus is a cylinder type mashing machine, suitable for evaluation of dimensional and appearance changes such as shrinkage and/or ruck of textiles and knitwear by laundry.
This apparatus consists of an outer tank and a cavernous cylinder which rotates forward and reverse. Moreover, there are three 7.5cm high crossbars in the cylinder that assembled evenly 120° apart.
Washing test is, firstly inputting the control program, after putting into sample with detergent, you can automatically "feed", "warm", "wash" and "flush" etc.
WS-1SE type, applies both electric and steam heating methods, and there is an ON-OFF manual steam switch. Water supply and drainage is manually maneuvered. "feed", "wash", "drain", "flush" and "rinse" etc. are independently operated.
Spec
| WS-1SE | |
|---|---|
| Operation mode | Manual |
| Heating method | Electric and steam |
| Heater capacity | 2KW |
| Temp. regulator | Digital |
| Feed water quantity | Water gauge |
| Timer | Digital preset timer (built-in timer for rinse time) |
| Cylinder speed | 37 times/min. (forward 15 sec. stop 3 sec. and reverse 15sec.) |
| Test bath dimension | W800×D570×H570mm approx. |
| Cylinder dimension | φ470×600(W)mm |
| Outside dimension | W1400×D700×H830mm, piping with 20mm higher |
| Valve caliber size | Feed-1B, Drain-2B, Steam-3/4B |
| Power source | Three-phase 200V |