PRODUCTS

Back to lists

Test Washer Apparatus(Washer Method)【end of manufacture】

Model

WS-1SE

Reference standard

JIS L 1096, JIS L 1018

Use/Good point

This apparatus is a cylinder type mashing machine, suitable for evaluation of dimensional and appearance changes such as shrinkage and/or ruck of textiles and knitwear by laundry.
This apparatus consists of an outer tank and a cavernous cylinder which rotates forward and reverse. Moreover, there are three 7.5cm high crossbars in the cylinder that assembled evenly 120° apart.
Washing test is, firstly inputting the control program, after putting into sample with detergent, you can automatically "feed", "warm", "wash" and "flush" etc.
WS-1SE type, applies both electric and steam heating methods, and there is an ON-OFF manual steam switch. Water supply and drainage is manually maneuvered. "feed", "wash", "drain", "flush" and "rinse" etc. are independently operated.

Spec

 WS-1SE
Operation modeManual
Heating methodElectric and steam
Heater capacity2KW
Temp. regulatorDigital
Feed water quantityWater gauge
TimerDigital preset timer (built-in timer for rinse time)
Cylinder speed37 times/min. (forward 15 sec. stop 3 sec. and reverse 15sec.)
Test bath dimensionW800×D570×H570mm approx.
Cylinder dimensionφ470×600(W)mm
Outside dimensionW1400×D700×H830mm, piping with 20mm higher
Valve caliber sizeFeed-1B, Drain-2B, Steam-3/4B
Power sourceThree-phase 200V