PRODUCTS

Back to lists

Scott Type Crease-Flex Abrasion Tester

Model

SCF-100, SCF-200

Reference standard

JIS L-1096、K-6406-6
JASO M403
GMW3217
GB/T 8948-2008 standards

Use/Good point

This machine is used for the determination of "Fatigue strength by the fir" and "Crease wear-out strength" such as the resin finishing cloth, the leather crossing, and leather etc.
First of all, both ends of the test piece are fixed to right and left two zippers that leave space regulations.
Afterwards, the zipper is pressed mutually by a regulated pressure load, one of zippers are made to reciprocate back and forth in the state, and the test piece is rubbed.

Spec

 SCF-100SCF-200
Test pieces1pc.2pcs.
Zipper width45mm45mm
Zipper interval~50mm(can be adjusted)~50mm(can be adjusted)
Stroke~60mm(can be adjusted)~60mm(can be adjusted)
Load weight0.5~2.0kg(can be adjusted)0.5~2.0kg(can be adjusted)
Loading modeSpring pressure waySpring pressure way
Friction reciprocating speedApprox. 120times/min.Approx. 120times/min.
DisplayLCD preset(6-digit)LCD preset(6-digit)
Power sourceAC100V 50/60HzAC100V 50/60Hz
DimensionsW400×D450×H360mmW400×D700×H360mm